Tek2000 Tek2000
 




 















Product Index > Add-On > Cable > Coaxial > Low Loss
 100ft Coaxial Cable (Low Loss RG11)

DESCRIPTION

100ft Belden RG11, low-loss, 14 AWG solid copper-covered steel inner conductor with Duobond quad shielding coaxial cable for superior transmission of C/Ku-Band satellite signals and OTA terrestrial antenna signals.

Recommended for long runs or superior signal transmission. This coaxial cable has a thicker inner conductor than standard coaxial cables such as RG6 and is used by cable head-ends for MATV signal transmission to maximize the carrier-to-noise signal ratio over long distances.

This cable has 2dB less power attenuation per 100 ft than a standard coaxial cable (e.g. RG6) and will make a major difference in signal propagation over long cable runs. The best strategy for a successful big dish installation is to locate the dish as close as possible to your house (and receiver) and avoid as much signal attenuation as possible. If this is not possible, and you must use a long cable run, we recommend you use RG11 low-loss coaxial cable and consider upgrading to a larger aperture size dish if necessary.

If you currently have a long cable run using standard coaxial cable (e.g. RG6) and some weak transponders are on the threshold of detection and cannot be locked, upgrading to RG11 cable will solve your problem.

Note: This is an Add-On product only and cannot be purchased separately.

Note: Free shipping on this product when purchased as an Add-on with another product.

FEATURES

  • Low Loss Coaxial Cable used by MATV
  • F-connectors crimped on both ends

INCLUDES

  • RG11 Coaxial Cable
  • Two F-Connectors
 
 

Price: $100.00 USD


Out-of-Stock
(ETA: Add-On Only)


TECHNICAL

SpecificationValue
  
Technical Specification 
Wire Gauge 14 AWG
Number of conductors 1
Shielded Yes (Aluminum Braid)
PVC Jacket Color Black
Mechanical Characteristics 
Bulk Cable Weight 59 lbs/1000 ft
Max. Recommended Pulling Tension 308 lbs
Min. Bend Radius 4.5 inches
Temperature Range -40C to +80C
Electrical Characteristics 
Impedance 75 Ohms
Conductor DC Resistance 11 Ohms/1000ft
Outer Shield DC Resistance 3.0 Ohms/1000ft
Max Voltage 300 V RMS
Attenuation 
300 MHz 2.15 dB/100ft
550 MHz 2.94 dB/100ft
750 MHz 3.50 dB/100ft
1000 MHz 4.23 dB/100ft
Shipping 
Single Box Rectangular (50 lbs)





  , , , , , , , , ,





 
 
 
 
 
 
 
 
 
 






  • commercial_1
  • commercial_2
  • consumer_3
  • consumer_4
  • consumer_5