Tek2000 Tek2000
 



Product Index > Motorization > Actuators > All > Heating
 48-inch Actuator Heating Kit

DESCRIPTION

Does your C band dish linear actuator freeze and not move in the winter? Does your actuator become sluggish and move very slowly when the temperatur falls below freezing?

If you answered yes to the above, then you need our actuator heating de-icing kit that will keep your big dish moving all winter long!

This product wraps around the tube of your actuator and is insulated with a two plastic outer tubes. This will keep the grease inside your actuator warm and soft and allow it to operate normally even under extreme low temperatures. Your positioner will also work better because it depends on clean pulses coming from the reed sensor and this only happens when the actuator can move quickly (frozen actuators that move slowly produce smaller pulses).

NOTE: This product is highly recommended for cold climates. You must power the heater with a buried A/C power line or outdoor extension cable.

NOTE: Actuator is not included.

FEATURES

  • 115W Power Rating (120V)
  • Operates down to -40°F (-40°C)
  • Power indicator light
  • Energy saving thermostat

INCLUDES

  • 20ft Heating Cable
  • Thermostat
  • Two 48-inch insulating tubes
  • Two 3-inch insulating tubes
  • Tie wraps
 
 

Price: $135.00 USD


Estimate Shipping [Select Shipping Country]



QTY:

In-Stock


TECHNICAL

SpecificationValue
  
Technical 
Input Voltage 120V AC
Heating Cable Length 20ft
Large Tube Insulator Length 48" (121.9cm)
Small Tube Insulator Length 4" (10.2cm)
Environment +5°C to -40°C
Shipping Details 
Single Box 48"x6"x3" Rectangular (4 lbs)





  , , , , , , , , , , , , , , , ,