|
DESCRIPTION
Dual output C-Band orthogonal feed horn with dual anti-interference 5G filters used for the simultaneous reception of both Vertical and Horizontal microwaves. It utilizes a mechanical waveguide post filter and mini electronic LNB filter which bolt together to make the most powerful 5G anti-interference feed system available anywhere on the market today!
If your antenna is located near a 5G wireless tower transmitting power in the 3.5-3.8 GHz microwave band, it will overwhelm the small amount of power coming from the communications satellite resulting in intermodulation signal interference.
Symptoms of 5G interference include: complete signal loss on some or all satellites or partial signal degradation on a single transponder and normal performance on the rest. To combat such interference, this feed uses a mechanical waveguide with posts to reject out of band interference and an LNB with a 2nd order band-pass electronic filter for additional stop band rejection. This combination is guaranteed to reject all interference sources below 3.8 GHz and above 4.2 GHz.
This dual C-Band orthogonal feed can be used for simultaneous reception of both vertical and horizontal polarities.
It separates the vertical and horizontal microwaves and conducts them to their own waveguides. It includes two waveguide post filters and two mini LNBs which bolt together.
This feed setup is typically used by cable head-ends to allow switching of both polarities to multiple decoders/receivers. You can also use it for a consumer satellite receiver setup by using a 13-18V voltage switch (sold separately below).
Note: Commercial grade 5G anti-interference c-band feed system guaranteed to perform or your money back!
Note: If you are experiencing heavy 5G interference that blacks out almost all satellite transponders, then this is the only feed horn solution that will recover your c-band satellite reception.
Note: This feed horn system was field tested 400-ft from a 5G wireless transmitter in a major metropolitan area on a 12-ft satellite dish. It recovered all affected satellite transponders. In the unlikely event that you do not recover all transponders, simply add a 2nd waveguide post filter (sold separately) for additional interference suppression.
Note: This dual output feed horn setup is typically used by cable head-ends and TV/Radio stations that require reliable c-band reception. It can also be used by backyard satellite enthusiasts who are unhappy with the performance of consumer grade 5G filter solutions.
FEATURES
- Precision cast-aluminum construction
- Dual output c-band feed
- Thick, commercial quality scalar ring
- 5G anti-interference mechanical post filter
- Low-noise, 5G anti-interference mini LNBs
- Fits under most feed covers
INCLUDES
- Dual Mode C-Band Feedhorn
- Scalar Ring
- Two mini (5G anti-interference) LNBs (3.8-4.2 GHz)
- Two waveguide post bandpass filters (3.8-4.2 GHz)
- Weather seals
- Mounting Screws
|
Price: $699.00 USD
In-Stock
|
TECHNICAL
|
Specification | Value |
| |
Construction | |
Material |
Aluminum
| Color |
Brown/White
| Finish |
Durable flake-resistant coating
|
C-Band | |
C-Band Polarity |
Linear (Vertical or Horizontal)
| LNB ON |
13V - 24V
| L.O. Frequency |
5150 MHz
| L.O. Stability |
1.0MHz (Typ)
| RF Input |
3.8GHz - 4.2GHz
| RF Output |
950MHz - 1350MHz
| C-Band Gain |
~65dB (Typ)
| Noise Figure |
~14K - 17K (Typ)
| L.O. Phase Noise |
65dBc/Hz @1kHz (Min)
| Input VSWR |
2:1
|
Filter Response | |
Filter Type |
Bandpass
| Filter Construction |
Electronic and Mechanical
| Pass Band Frequency |
3800-4200 MHz
| Filter Insertion Loss |
<0.4 dB
| Return Loss |
>18 dB
| Inhibition |
>60 dB @ 3750 MHz
|
Connectors | |
Output Connector |
75 Ohm F Type
|
Shipping Details | |
Single Box |
30"x10"x8" Rectangular (22 lbs)
|
|
|
|
feedhorns, LNBF, 3.8-4.2GHz, C band 5G Filter, waveguide post filter, 5G waveguide filter, low-noise block, universal LNBF, scalar ring, orthomode, orthogonal, dual feed, dielectric plate, anti-interference, 5G, wimax, PLL, DRO, dish feed, c-band, chaparral communications
|
|
|
|