150ft Belden RG11, low-loss, 14 AWG solid copper-covered steel inner conductor with Duobond quad shielding coaxial cable for superior transmission of C/Ku-Band satellite signals and OTA terrestrial antenna signals.
Recommended for long runs or superior signal transmission. This coaxial cable has a thicker inner conductor than standard coaxial cables such as RG6 and is used by cable head-ends for MATV signal transmission to maximize the carrier-to-noise signal ratio over long distances.
This cable has 2dB less power attenuation per 100 ft than a standard coaxial cable (e.g. RG6) and will make a major difference in signal propagation over long cable runs. The best strategy for a successful big dish installation is to locate the dish as close as possible to your house (and receiver) and avoid as much signal attenuation as possible. If this is not possible, and you must use a long cable run, we recommend you use RG11 low-loss coaxial cable and consider upgrading to a larger aperture size dish if necessary.
If you currently have a long cable run using standard coaxial cable (e.g. RG6) and some weak transponders are on the threshold of detection and cannot be locked, upgrading to RG11 cable will solve your problem.
Note: This is an Add-On product only and cannot be purchased separately.
Note: Free shipping on this product when purchased as an Add-on with another product.
- Low Loss Coaxial Cable used by MATV
- F-connectors crimped on both ends
- RG11 Coaxial Cable
- Two F-Connectors
Price: $150.00 USD
| || |
|Technical Specification|| |
|| 14 AWG
|Number of conductors
||Yes (Aluminum Braid)
|PVC Jacket Color
|Mechanical Characteristics|| |
|Bulk Cable Weight
||59 lbs/1000 ft
|Max. Recommended Pulling Tension
|Min. Bend Radius
||-40C to +80C|
|Electrical Characteristics|| |
|Conductor DC Resistance
|Outer Shield DC Resistance
||300 V RMS|
||Rectangular (75 lbs|